HPI Racing Flux HP 2200kV Brushless System

Tower Stock# LXXRZ9  •  Manufacturer Stock# 100686
HPI Racing Flux HP 2200kV Brushless System (large view)
Notes from our tech department:
This is the HPI Flux Tork 2200Kv Brushless Sensorless Motor
and the Flux Blur Electronic Speed Control.


Motor Features-
Extra large heat sinks
Giant silicone wires
Bullet connectors for easy installation
High efficiency design (85+%)
Motor wires can be shortened
Electronic Speed Control-
Handles up to 6S LiPo power
Fully programmable with the Castle Link USB Programming Kit
(HPIC0573)-not included
Integrated cooling fan
Oversize ABEC-1 front and rear bearings


HPI Flux Tork 2200Kv Brushless Motor, Flux Blur ESC, 6.5mm bullet
motor connectors, 10AWG motor wires with two Deans Male Ultra Plugs
on/off switch, receiver connector and instructions


Installation on the vehicle


Max Input Volts: 25.2V
Amp Rating*: 120A
Weight: 424g (15 oz)
Motor Diameter: 39.98mm (1.6")
41.78mm (1.6") with fins
Motor Length: 75.18mm (3")
Shaft: 5mm (0.20")
Bearings: Oversize ABEC-1 front and rear
Connector: Female bullet type, 6.5mm
Electronic Speed Control-
Max Voltage: 25.2V maximum
LiPo Handling Capacity: 6s
Continuous: 120A
Resistance: 0.0003 ohms per phase
Brake: Proportional with adjustable curve
Reversible: Yes - with lockout
Low Voltage Cutoff: Programmable
Size: 2.2" x 1.9" x 1.4" (56 x 48 x 35mm)
Weight w/wires: 4.26oz (121g)

jxs 12/21/09

‐ Mailing Address ‐
‐ Additional Contact Information ‐