This is the Flux HP 2650kV Brushless System from HPI.

FEATURES: Motor:
           Extra large heat sink
           Giant silicone wires
           Highly efficient (85+%!) design that makes enough power to do
            standing back flips
          ESC:
           Fully programmable
           Fitted with fat 6mm bullet connectors

INCLUDES: One Flux HP 2650kV Brushless Motor
          One Flux Blur ESC

REQUIRES: Installation on the vehicle

SPECS:    Motor:
           Max Input Volts: 16.8
           Motor Diameter: 39.98mm (1.6")
           41.78mm (1.6") with fins
           Motor Length: 68mm (2.7")
           Shaft: 5mm (0.20")
           Bearings: Oversize ABEC-1 front and rear
           Connector: 6.5mm (0.26")
          ESC:
           25.2V maximum with Flux Tork 2200Kv brushless motor
           16.8V maximum with Flux Tork 2650Kv brushless motor
           Sensorless technology eliminates additional sensor wiring and
            complexity
           Continuous: 120A*
           Resistance: 0.0003 ohms per phase
           Brake: Proportional with adjustable curve
           Reversible: Yes - with lockout
           Low Voltage Cutoff: Programmable
           Size: 2.2" x 1.9" x 1.4" (56mm x 48mm x 36mm)
           Weight w/wires: 121g (4.26 oz)
           Connector: 6.5mm bullet

                                                                    cnh 8/13/09
                                                                         ir/jxs