HPI Racing 1/8 Vorza Flux HP RTR w/VB-1 Buggy Body

Tower Stock# LXYED3**  •  Manufacturer Stock# 103420
HPI Racing 1/8 Vorza Flux HP RTR w/VB-1 Buggy Body (large view)
Notes from our tech department:
This is the electric powered, radio controlled, 1/8 scale, ready to run
HPI Vorza Flux HP Buggy with VB-1 Body.

FEATURES

Chassis: 7075 Aluminum 0.16" (4mm) thick
Drive: Four wheel shaft
Motor: HPI Flux Tork 2200Kv brushless
Motor Mount: Aluminum with integrated heat sink and fan mount
Radio: HPI TF-3 AM system with BEC
ESC: HPI Flux Blur, sensorless programmable, with cooling fan
Battery Box: Fully adjustable to fit a variety of battery
configurations
Body: VB-1 buggy with rear wing, trimmed and painted with decals
applied
Differentials: Three, adjustable
Pinion Gear: Hardened steel 15 tooth
Main Gear: Hardened steel 48 tooth
Suspension: Fully adjustable, sway bar equipped
Shocks: Big bore high performance oil-filled aluminum body
Shock Towers: 0.16" (4mm) thick 7075 anodized aluminum with front
nylon skid guards for durability
Tires: HPI Proto, 1.65" (42mm) wide, 4.6" (117mm) outer diameter
Wheels: HPI V7, black in color 7-spoke
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: Two-year limited warranty beginning at date of purchase.
Warranty valid only in the USA, Canada and South America

INCLUDES

RTR HPI Vorza Flux HP Buggy with painted VB-1 Body, radio, motor,
ESC tires, wheels, decals, wrenches and instruction sheet

REQUIREMENTS

AA Batteries: Eight for transmitter
Batteries: Two 6-7 NiMH cell, minimum 4000mAh side by side packs
(DO NOT use stick packs with welded tabs)
OR two 2-3 cell LiPo packs, minimum 25C with at least 3500mAh
Battery Charger: For selected battery type
Connectors: Two Deans Female Ultra Plugs (WSDM1303) if selected
batteries do not have them
Tools and track equipment

SPECIFICATIONS

Vehicle;
Length: 20" (508mm)
Width: 12" (305mm)
Height: 5.7" (146mm)
Wheelbase: 12.8" (325mm)
Weight: 7.1 lbs (3230g)
Body;
Length: 13.1" (332mm)
Width: 7.7" (195mm)
Height: 4.3" (110m)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 8x14mm Fr Hubs 2 DTXC1583
6 8x16mm Differentials 3 DTXC1585
4 8x16mm Drive Shafts 2 DTXC1585
4 6x10mm Steering Assembly 2 DTXC1561

The Vorza Flux body is painted silver with either red or blue stripes
It is not possible to request a specific stripe color because they
are supplied by the manufacturer at random.

jxs 9/08/09
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐