This is the 1/10 scale electric powered, radio controlled,
           Tamiya Hatsune Miku Studie GLAD BMW Z4 On-Road Car Kit.

FEATURES: Chassis: TT-01 type E with shock tower now molded separately from
            the gear case covers and new upper deck with transponder mount,
            new A parts (Uprights) made of polycarbonate plastic material,
            new D parts (upper deck, motor cover and more) made of fiberglass-
            reinforced nylon material
          Drive: Four wheel shaft drive
          Motor: 540 size with pre-attached leads
          Electronic Speed Control: Tamiya TEU-101BK
          Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights,
            see COMMENTS
          Shocks: Friction, not oil-filled, composite body
          Gearbox: Sealed front and rear
          Differentials: Bevel gear
          Transmission: Single speed
          Tires: Racing slicks 1.02" (26mm) wide, 2.48" (63mm) diameter
          Wheels: BBS style mesh 1.02" (26mm) wide, 2.04" (52mm) diameter,
            gray in color
          Body: Lightweight polycarbonate, requires trimming and painting
            injection molded side mirrors and rear wing, decals with characters
            from a popular Vocaloid series of Japanese anime
          Bumpers: Foam front bumper
          Suspension: Four wheel independent double wishbone
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering Tie Rods: Fixed non-adjustable, caster/toe-in refers to the
            angle of the front suspension when viewed from the side of the car
            in relation to the chassis
          Steering: Bell-crank TA-05 type with servo saver
          Servo Saver: Included

INCLUDES: Tamiya Team Studie Hatsune Miku GLAD BMW Z4 kit with friction shocks
            540 motor, electronic speed control, clear body, tires, foam
            bumper, wheels, 19 tooth pinion gear, 61 tooth spur gear,
            instructions, LED light unit, window mask and body trim decals

REQUIRES: Radio: 2-channel with one steering servo
          Battery: 6 cell stick pack with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Misc: Polycarbonate safe paint, building & track equipment

SPECS:      VEHICLE-
          Length: 17.5" (444mm)
          Width:   7.4" (187mm)
          Height:  5.2" (132mm)
            BODY-
          Length: 16.3" (415mm)
          Width:   6.3" (161mm) in front of rear wheels, narrowest point
                   7.5" (190mm) at rear wheels, widest point
          Height:  4.3" (109mm)

COMMENTS: The TLU-02 Light Control Unit (not included) can be installed for
            more light effects, order TAMC1477.

          For Replacement Ball Bearings use:
            Qty.  Size      Location                     Qty. Bearing Set
            12   5x11mm   front & rear diff gears, hubs     6 DTXC1547
             4   8X12mm   front & rear diff gears           2 DTXC1597

          Body pictured on the box is painted Tamiya PS-23 Gunmetal (TAMR8623)
            with all sponsor and anime decals applied.

                                                                   jxs 10/06/09
                                                                         ir/jxs