3.7V 400mAh 1S LiPo Battery
Installation in the helicopter and charging only with included
battery charger, HMXP2019
Length: 1.3" (33mm)
Width: 0.98" (25mm)
Thickness: 0.33" (8.5mm)
Weight: 0.35oz (10g)
Charge this battery only with charger included with heli
Never charge in excess of 4.20V per cell.
If the battery should become damaged, discard the battery. Do not
attempt to use a damaged battery.
Do not leave the charger unattended while charging. Disconnect the
battery and remove input power from the charger immediately if
either becomes hot! However, it is normal for the charger to get
Disconnect the battery from the charger and carefully move the
battery to a fireproof location if the battery begins to swell or
Never charge at currents greater than 1C.
Always charge in a fireproof location.
Never trickle charge.
Never allow the battery temperature to exceed 150° F (65° C).
Never disassemble or modify pack wiring in any way or puncture cells.