AeroWorks Extra 300 QB ARF Blue 35cc,78"

Tower Stock# LXYSW0  •  Manufacturer Stock# AEX300B35
AeroWorks Extra 300 QB ARF Blue 35cc,78
Shipping Note:Details
Notes from our tech department:
This is the radio controlled, glow or gasoline powered, almost-ready-to-fly
35cc Extra 300 QB (Quick Build) Airplane from Aeroworks.


Construction: Laser cut, CAD design jig built balsa and ply
Wings: Two-piece balsa and ply construction with carbon fiber wing
Aileron Control: Dual servo
Rudder Control: Single servo pull-pull design
Engine Box: Plywood, installed and fuel proofed
Engine Mount: Two-piece composite
Cowl: Painted fiberglass
Covering: Ultracote
Canopy: Clear, pre-mounted
Landing Gear: Painted 7075 aluminum, 0.12" (3mm) thick, three wheels
Fuel Tank: 25oz (750cc)
Wheel Pants: Painted fiberglass
Building Time: Ready to fly in approximately 8-10 hours
Warranty: Aeroworks manufacturing guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This limited warranty does not cover any component parts damaged by
use or modification.


Pre-built and covered wings, fuselage and tail assemblies, pushrods,
all hardware, decals, fuel tank, landing gear, wheels, throw meter,
carbon fiber wing and stab tube, spinner and instruction manual


Radio: 6-channel minimum computer radio strongly recommended
Aileron Servos: Two with at least 180 oz/in torque @ 6V
Rudder Servo: One with at least 180 oz/in torque @ 6V
Elevator Servo: Two with at least 180 oz/in torque @ 6V
all servos listed above must be digital with metal gears
Throttle Servo: One standard size and torque
6" (152mm) Servo Extensions: Six
24" (610mm) Servo Extensions: Two
Receiver Battery: 6V 1700mAh minimum
Engine: 1.60 cu in (26 - 23cc) with Pitts muffler recommended OR
35 - 45cc gasoline, gasoline engine also requires
standard size and torque servo for choke and 4.8V 1700mAh
battery for ignition
Spinner: 3" (76mm)
Propeller, building and field equipment


Wingspan: 78" (198cm)
Wing Area: 1200 sq in (77.52 sq dm)
Fuse Length: 69" (175cm) rudder to front of cowl
73" (185cm) rudder to front of spinner
Weight: 14 - 15lbs (6350 - 6804g)
Center of Gravity: 3" (76mm) back from the leading edge of the
wing measured at the wing tip

Control Throws- 3D Rate High Rate Low Rate
Elevator Up/Down 4" or 45 1-1/2" or 18 1" or 12
Rudder Left to Right: n/a or 45 n/a or 35 n/a or 25
Ailerons Up/Down 3" or 35 2" or 25 1-1/2" or 28

jxs 12/11/09

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐