AeroWorks Extra 300 QB ARF Yellow 50cc,86"

Tower Stock# LXYSW2  •  Manufacturer Stock# AEX300Y50
AeroWorks Extra 300 QB ARF Yellow 50cc,86
Shipping Note:$59.99 Surcharge
Notes from our tech department:
This is the radio controlled, gasoline powered, almost-ready-to-fly
50cc Extra 300 QB (Quick Build) Airplane
in Yellow and White Covering from Aeroworks.
Designed for precision and 3D flying.


Construction: Laser cut, CAD design jig built balsa and ply, double
beveled control surfaces
Wings: Two-piece balsa and ply construction with 6061 T-6 anodized
aluminum wing tube
Aileron Control: Dual servo
Rudder Control: Single servo pull-pull design
Stabilizer: Two piece with 6061 T-6 anodized aluminum stab tube
Engine Mount: Fuelproofed plywood with laser cut mounting template
and machined aluminum engine standoffs
Cowl: Painted fiberglass
Covering: Ultracote
Canopy: Tinted, pre-mounted
Landing Gear: Painted 7075 aluminum, premounted main gear cuffs,
steerable tailwheel
Fuel Tanks: 25oz (750cc) for gasoline, 15oz (450cc) for smoke
Wheel Pants: Painted fiberglass
Building Time: Ready to fly in approximately 8-10 hours
Warranty: Aeroworks manufacturing guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This limited warranty does not cover any component parts damaged by
use or modification.


Pre-built and covered wings, fuselage and tail assemblies, pushrods,
all hardware, decals, two fuel tanks, landing gear, wheels, throw
meter, wing tube, and instruction manual


Radio: 6-channel minimum
Aileron Servos: Two with at least 180 oz/in torque @ 6V
Rudder Servo: One with at least 180 oz/in torque @ 6V
Elevator Servo: Two with at least 180 oz/in torque @ 6V
all servos listed above must be digital with metal gears
Throttle Servo: One standard size and torque
6" (152mm) Servo Extensions: Four
12" (305mm) Servo Extensions: One
24" (610mm) Servo Extensions: Two
Receiver Battery: 6V 1700mAh minimum
Ignition Battery: 4.8 volt 1700mAh minimum
Two switches with charge jacks
Engine: 3.5 cu in (50cc) gasoline
Spinner: 3-1/2" (89mm)
Propeller, building and field equipment


Wingspan: 86" (218cm)
Wing Area: 1305 sq in (87.21 sq dm)
Fuse Length: 74" (188cm) rudder to front of cowl
78" (198cm) rudder to front of spinner
Rudder Height: 21" (533mm)
Weight: 16.5 - 18lbs (7484 - 8165g)
Airfoil: Fully symmetrical
Center of Gravity: 3-3/4" - 4-1/4" (95 - 108mm) from the leading
edge of the wing measured at the wing tip

Control Throws- 3D Rate High Rate Low Rate
Elevator Up/Down 4-1/2" or 45 2" or 20 1-1/4" or 12
Rudder Left to Right: N/A or 45 N/A or 35 N/A or 25
Ailerons Up/Down 3-1/2" or 40 2-1/2" or 25 1-3/4" or 18

jxs 12/08/09

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐