AeroWorks Pitts Python QB ARF Red/White/Blue 50cc,70"

Tower Stock# LXYSW7  •  Manufacturer Stock# APPRWB50
AeroWorks Pitts Python QB ARF Red/White/Blue 50cc,70
Shipping Note:Details
Notes from our tech department:
This is the radio controlled, gasoline powered, almost-ready-to-fly
50cc Pitts Python QB (Quick Build) Airplane
in Red, White and Blue Covering from Aeroworks.
Designed for precision and 3D flying.


Construction: Laser cut, CAD design jig built balsa and ply, double
beveled control surfaces, premade tail flying wires
Wings: One-piece balsa and ply construction preglued
Aileron Control: Two servos per wing
Rudder Control: Single servo pull-pull design
Stabilizer: One piece
Engine Mount: Fuelproofed plywood with laser cut mounting template
and machined aluminum engine standoffs
Cowl: Painted fiberglass with scale baffling
Covering: Ultracote
Canopy: Tinted, pre-mounted
Landing Gear: Painted 7075 aluminum 0.20" (5mm) thick, 3-1/4" (83mm)
lite wheels, steerable solid rubber tailwheel
Fuel Tanks: 25oz (750cc) for gasoline, 15oz (450cc) for smoke
Wheel Pants: Painted fiberglass
Building Time: Ready to fly in approximately 10-12 hours
Warranty: Aeroworks manufacturing guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This limited warranty does not cover any component parts damaged by
use or modification.


Pre-built and covered wings, fuselage and tail assemblies, pushrods,
all hardware, decals, two fuel tanks, landing gear, wheels, throw
meter, wing tube, and instruction manual


Radio: 8-channel minimum
Aileron Servos: Four with at least 180 oz/in torque @ 6V
Rudder Servo: One with at least 180 oz/in torque @ 6V
Elevator Servo: Two with at least 180 oz/in torque @ 6V
all servos listed above must be digital with metal gears
Throttle Servo: One standard size and torque
6" (152mm) Servo Extensions: Nine
24" (610mm) Servo Extensions: Two
Y Harnesses: Two
Ignition Battery: 4.8 volt 1700mAh minimum
Two switches with charge jacks
Engine: 3.5 cu in (50cc) gasoline
Spinner: 3.5" (89mm)
Propeller, building and field equipment


Top Wingspan: 70" (179cm)
Bottom Wingspan: 68" (173mm)
Wing Area: 1725 sq in (111.43 sq dm)
Fuse Length: 68.5" (174cm) rudder to front of cowl
72" (183cm) rudder to front of spinner
Weight: 17 - 18lbs (7711 - 8165g)
Airfoil: Fully symmetrical
Center of Gravity: 2-1/4" (57mm) from top wing's leading edge at the
wing tip

Control Throws- 3D Rate High Rate Low Rate
Elevator Up/Down 4-1/2" or 45 2" or 18 1-3/8" or 12
Rudder Left to Right: 45 35 25
Ailerons Up/Down 2-1/2" or 35 2" or 30 1-1/2" or 25

jxs 12/09/09

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐