This is the radio controlled, gasoline powered, almost-ready-to-fly
                  50cc Ultimate 20-300 (Quick Build) Airplane
               in Yellow Blue and Silver Covering from Aeroworks.
                     Designed for precision and 3D flying.

FEATURES: Construction: Laser cut, CAD design jig built balsa and ply, double
            beveled control surfaces, premade tail flying wires
          Wings: One-piece balsa and ply construction preglued, preinstalled
            center cabane
          Aileron Control: Two servos per wing
          Rudder Control: Single servo pull-pull design
          Stabilizer: One piece
          Engine Mount: Fuelproofed plywood with laser cut mounting template
            and machined aluminum engine standoffs
          Cowl: Painted fiberglass with scale baffling
          Covering: Ultracote
          Canopy: Tinted, pre-mounted
          Landing Gear: Painted 7075 aluminum 0.20" (5mm) thick, 3-1/4" (83mm)
            lite wheels, steerable solid rubber tailwheel
          Fuel Tanks: 25oz (750cc) for gasoline, 15oz (450cc) for smoke
          Wheel Pants: Painted fiberglass
          Building Time: Ready to fly in approximately 8-10 hours
          Warranty: Aeroworks manufacturing guarantees this kit to be free from
            defects in both material and workmanship at the date of purchase.
            This limited warranty does not cover any component parts damaged by
            use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            all hardware, decals, two fuel tanks, landing gear, wheels, throw
            meter, and instruction manual

REQUIRES: Radio: 6-channel minimum
          Aileron Servos: Four with at least 180 oz/in torque @ 6V
          Rudder Servo: One with at least 180 oz/in torque @ 6V
          Elevator Servo: Two with at least 180 oz/in torque @ 6V
            all servos listed above must be digital with metal gears
          Throttle Servo: One standard size and torque
          6" (152mm) Servo Extensions: Nine
          24" (610mm) Servo Extensions: Two
          Y Harnesses: Two
          Ignition Battery: 4.8 volt 1700mAh minimum
          Two switches with charge jacks
          Engine: 3.5 cu in (50cc) gasoline
          Spinner: 3.5" (89mm)
          Propeller, building and field equipment

SPECS:    Wingspan: 68" (173cm)
          Wing Area: 1666 sq in (107.63 sq dm)
          Fuse Length: 74" (188cm) rudder to front of cowl
                       78.5" (199cm) rudder to front of spinner
          Cowl Width: 10" (254mm)
          Weight: 17.5 - 18.5lbs (7938 - 8391g)
          Airfoil: Fully symmetrical
          Center of Gravity: 1-1/2" (38mm) from top wing's leading edge at the
            wing tip

          Control Throws-     3D Rate             High Rate       Low Rate
          Elevator Up/Down   2-7/8" or 40°       2" or 22°       3/4" or 14°
          Rudder Left to Right: 8"                  6"              4"
          Ailerons Up/Down   2-1/2" or 40°       2" or 30°       1" or 15°

                                                                   jxs 12/09/09
                                                                         ir/jxs