This is the radio controlled, glow powered, almost-ready-to-fly
          .90-.120 Yak 54 QB (Quick Build) Airplane from Aeroworks.
                     For Intermediate Sport or 3D Pilots.

FEATURES: Construction: Laser cut and jig built balsa and ply and glued
            double-beveled control surfaces
          Wings: Two-piece balsa and ply construction with pre-hinged ailerons
            and carbon fiber wing tube
          Aileron Control: One servo per wing
          Rudder Control: Single servo pull-pull system
          Engine Box: Plywood, installed and fuel proofed
          Engine Mount: Two-piece composite
          Cowl: Painted fiberglass
          Covering: Ultracote
          Canopy: Pre-mounted molded plastic
          Landing Gear: Painted and pre-mounted 7075 Aluminum, three foam
            wheels
          Fuel Tank: 15oz (450cc)
          Spinner: White plastic 3" (76mm)
          Wheel Pants: Painted fiberglass
          Building Time: Ready to fly in approximately 8-10 hours
          Warranty: Aeroworks manufacturing guarantees this kit to be free from
            defects in both material and workmanship at the date of purchase.
            This limited warranty does not cover any component parts damaged by
            use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            all hardware, decals, throw meter, fuel tank, landing gear, wheels
            wing and stab tube, spinner  and instruction manual on CD

REQUIRES: Radio: 6-channel minimum computer radio with PCM receiver strongly
            recommended
          Aileron Servos: Two with at least 140 oz/in torque @ 4.8V
          Rudder Servos: One with at least 180 oz/in torque @ 4.8V
          Elevator Servo: Two with at least 140 oz/in torque @ 4.8V
          Throttle Servo: One, standard size and torque
          Servo Extensions: Four 6" for Ailerons
                            One 12" Throttle
                            Two 18" Elevators
          Receiver Battery: 6.0V 1700mAh minimum
          Engine: .90 -1.20 cu in (14.7 - 19.7 cc) 2 or 4 stroke with Pitts
            muffler
          Propeller, building and field equipment

SPECS:    Wingspan: 72" (183cm)
          Wing Area: 960 sq in (62.01 sq dm)
          Fuse Length: 62" (157cm) Rudder to Front of Cowl
                       65" (165cm) Rudder to Front of Spinner
          Weight: 9 - 10bs (4.08 - 4.53kg)
          Center of Gravity: 3-3/8" (86mm) back from the leading edge of the
            wing measured at the wing tip
          Control Throws-        3D Rate          High Rate          Low Rate
          Elevator:             3.5" or 45°     1.25" or 18° up   1" or 12° up
                                                1.5' or 20° down  1.25" or 14°
          Rudder left to right:  2"  or 50°     1.5"              1.25"
          Ailerons up & down:   2.5" or 35°    1.75" or 30°       1.5" or 18°

                                                                   jxs 12/14/09
                                                                         ir/jxs