Tamiya 1/10 Sand Scorcher VW Bug Racer 2010 2WD Kit

Tower Stock# LXYVN5  •  Manufacturer Stock# 58452
Tamiya 1/10 Sand Scorcher VW Bug Racer 2010 2WD Kit (large view)
Easy Pay
Request 3 Payments of $103.33 Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the electric powered, radio controlled, 1/10 scale
Sand Scorcher Buggy Kit.

FEATURES

Chassis: 0.08" (2mm) thick FRP main frame with duralumin plate for
added strenth and flexibility
Drive: Rear wheel
Motor: 540 type
Electronic Speed Control: Tamiya TEU-104BK with reverse
Transmission: Single-speed
Gearbox: Transparent plastic, fully enclosed, die cast metal and
clear resin components
Body: Polystyrene, trimmed and molded in white
Bumper: Front reinforced resin with integrated metal bars
Shocks: Oil filled
Ball Bearings: Full set
Tires: Front ribbed 2.7" (69mm) diameter, 0.71" (18mm) wide
Rear paddle 3.1" (79.5mm) diameter, 1.6" (40mm) wide
Wheels: Three-piece center lock, molded in white
Suspension: Front double trailing arm, die cast front and rear arms
and metal uprights, swing axle rear suspension with metal torsion
bars
Camber: Non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bellcrank type with servo saver

INCLUDES

Sand Scorcher Buggy Kit, 540 motor, white plastic body, tires, wheels
oil-filled shocks, decals, 15T pinion gear, instruction manual,
70 tooth spur gear, driver bust and ESC

REQUIREMENTS

Radio: 2-Channel with one servo
AA Radio Batteries: Eight for transmitter
Battery: Tamiya recommends a small 7.4V LiPo battery such as the
ElectriFly 2 cell 1200mAh LiPo battery (GPMP0835)
Connector: Deans Ultra Female to Kyosho type connector, DTXC2209 if
using a battery with a Deans Ultra Female plug
Balancer: If using LiPo battery with balance port
Charger: LiPo compatible, if using ElectriFly battery listed above,
the ElectriFly PolyCharge (GPMM3010) will work fine and requires
a 12V power source such as a car battery or power supply
Paint: Tamiya TS series lacquer or equivalent
Misc. Items: Building and track equipment

SPECIFICATIONS

Length: 15.7" (400mm)
Width: 8.3" (210mm)
Height: 5.9" (150mm)
Weight: 3.8lbs (1730g)
BODY-
Length: 13.6" (345mm)
Width: 6.8" (173mm) at widest point
Height: 4.7" (120mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
2 5x11mm Final Gear Shaft 1 DTXC1547
2 5x11mm Counter Gear 1 DTXC1547
2 5x11mm Drive Shaft 1 DTXC1547
2 5x11mm Rear Shafts 1 DTXC1547
4 5x11mm Front Wheels 2 DTXC1547
To paint the body to match the pictures on the box, order the
following Tamiya colors;
French Blue TAMR5010 Gloss Black TAMR1518
Pure White TAMR5026 Clear Orange TAMR1526
White Flat Black TAMR1701
Red TAMR1507 Flat Flesh TAMR1715

jxs 02/26/10
ir/jxs

jxs 01/05/10
ir/jxs

Resources
See Tower Catalog page 107.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐