This is the brushless electric powered, radio controlled, ready to run
Team Associated RC10T4.1 off-road Racing Truck.
FEATURES: Chassis: Molded composite, low center of gravity, adjustable battery
position
Drive: Rear wheel, with steel dog bones (not CVDs)
Differential: Sealed, planetary gear
Transmission: 2.6:1 laydown Stealth type, high-torque capacity
Bearings: Full set, rubber sealed
Shocks: Oil-filled blue anodized aluminum (silver springs on front
and green springs on the rear)
Radio: Team Associated XP3-SS 2.4GHz 3-channel with SHV1504 metal
gear steering servo
Speed Control: XP SC450-BL brushless with LiPo cutoff, forward and
reverse with reverse lockout
Motor: Reedy 3300kV brushless motor
Front Tires: Associated racing compound ribbed
Rear Tires: Associated racing compound bow-tie style
Wheels: White (dyeable) dish style 2.2" (56mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Angled coplanar design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel,
built-in servo saver
Body: Painted Interceptor-T with rear wing
Slipper Clutch: High-torque capacity double-sided provides finer
adjustment
INCLUDES: Pre-assembled Team Associated RC10T4.1 truck with brushless motor,
2.4GHz radio, metal gear steering servo, painted body, brushless
ESC and manual
REQUIRES: AA Batteries: Eight for transmitter
Battery: 6-cell stickwith Deans Ultra Female Connector
Battery Charger: Peak type for selected battery
Building and track equipment
SPECS: Vehicle-
Length: 15.3" (390mm)
Width: 12.4" (316mm)
Track: 10.6" (270mm)
Weight: 3.9lbs (1756g)
Wheelbase: 11.3" (288mm)
Gear Ratio: 2.6:1
Body-
Length: 15.25" (387mm)
Width: 5.8" (148mm) behind front wheels, narrowest point
Width: 6.5" (165mm) at rear wheels, widest point
Height: 4.1" (105mm)
COMMENTS: The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
affordable upgrade for this vehicle.
If bearings are needed use:
Two DTXC1423 3/8 x 3/16 four needed, front wheels
Two DTXC1423 3/8 x 3/16 four needed, rear hub carriers
Two DTXC1423 3/8 x 3/16 four needed, transmission-top & middle
One DTXC1411 5/32 x 5/16 two needed, diff outdrives
One DTXC1437 3/8 x 5/8 two needed, ball diff
jxs 12/18/09
ir/jxs
|