Eagle Tree Systems Tiny 10Hz GPS V4 Expander

Tower Stock# LXYYV0  •  Manufacturer Stock# GPS-V4
Eagle Tree Systems Tiny 10Hz GPS V4 Expander (large view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 10Hz GPS V4 Expander Module for the
Eagle Tree Data Recorder and V3 eLogger Products.


For use in either RC vehicles or aircraft, this module allows
modelers to log vehicle position, visualize model on a 3D graph
against a photo image of field or track and see position of model
on the Seagull Dashboard screen
Google Earth software allows data to be easily and fully visualized
3D position graphing in the Virtual Dashboard software with support
for overlayed images of field or track
Latitude/longitude, GPS speed, GPS altitude, course, distance to
operator and UTC timestamp
One year limited warranty through mannufacturer beginning at date of


10Hz GPS Expander Module with 4-pin connector and instruction sheet


Plugging into Data recorder and installing in model


Update Rate: 10Hz
WAAS and EGNOS support
Time to Fix: 1 sec hot, 36 sec cold (typ)
Speed Accuracy: Approx. 0.1 m/s
Position Accuracy: aprox 8.2' (2.5m)
Antenna: Built-in patch
Sensitivity: Approx. 165dBm
Datum: WGS84
Length: 1.4" (35mm)
Width: 0.9" (20mm)
Thickness: 0.3" (8mm)
Weight: 0.4oz (11g)
Current Consumption: Less than 04 mA when tracking


This expander is compatible with Eagle Tree Systems eLogger V3,
Recorder V2, Car and Boat Data recorders with firmware version
5.55 or higher. It is also compatible with Seagull Dashboards
with firmware version 4.76 or higher.
For firmware lower than these versions, e-mail
support@eagletreesystem for upgrade info.

lmm 01.22.10

‐ Mailing Address ‐
‐ Additional Contact Information ‐