|
|
 |
Other Items of Interest |
 |
|
|
Move your mouse over the listed items for pictures. Click any item for product details and to check compatibility.
Customers who purchased the above product also bought:
|
|
|
|
Tech Notes |
|
|
|
| |
NOTES FROM OUR TECH DEPARTMENT
This is a tuned pipe adaptor (also called an exhaust manifold), which
is used to adapt a tuned pipe to an engine. This adaptor is a piece of metal
tubing that turns 90 degrees towards the rear of the engine. At the end of this
adaptor you will install the piece of silicone tubing (called a tuned pipe
coupler, one is INCLUDED with this adaptor), and use tie-wraps (also INCLUDED)
to keep the silicone from slipping. The tuned pipe will fit into the silicone
tubing. The pipe is "tuned" by shortening or lengthening the distance the tuned
pipe fits into the exhaust adaptor until the engine reaches maximum power and
RPM. This adaptor measures 2-3/8" from the centerline of the output pipe to
the outside of the base where it screws onto the engine. If an adaptor is
needed that will be closer to the cowl (shorter radius), use MACG2860. If one
needs an adaptor that extends further away from the cowl, use MACG2862.
.
This can be used with any of the following engines:
O.S. .61 SF series
.
9/1/92 JBN *8)
|
|
– If you need more information, use these Macs resources – |
Web Site: http://www.macspro.com/
Phone: 916-456-6932
|
|
Postal Address:
Macs
7935-A CARLTON ROAD
SACRAMENTO, CA 95826
|
|
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following: 
Yes
