This is the radio controlled, electric powered, almost-ready-to-fly
Phoenix Models Katana Scale Aerobatic Airplane.
Recommended for Intermediate Pilots.
FEATURES: Construction: Built-up balsa and plywood, prebuilt plywood motor
mount
Covering: Pre-applied, color scheme is white, pink and blue with
yellow and blue accents
Wings: Two-piece wood with aluminum joiner tube
Radio Compartment: Plywood reinforced
Cowling: Painted fiberglass
Canopy: Clear
Wheel Pants: Painted fiberglass
Landing gear: Pre-bent 0.14" (3.5mm) aluminum with 2-1/2" (63mm)
treaded rubber main wheels and one 1" (25mm) rubber tail wheel with
pre-bent 0.078" (2mm) thick wire
Spinner: 2.25" (57mm) red plastic
Building Time: Ready to fly in 6-8 hours
Aileron Control: Dual servo
Hardware: Hinges, wing bolts and all other required fasteners
included
INCLUDES: Prebuilt and pre-covered wings fuselage and tail section, aluminum
main landing gear, tailwheel wire, prebuilt plywood motor mount,
main and tail wheels, pre-bent pushrods, hardware package,
fiberglass cowling and wheel pants, clear canopy,
decals, photo-illustrated instructions,
REQUIRES: Motor: Brushless outrunner such as the Great Planes ElectriFly
RimFire .32 42-50-800 (GPMG4700)
ESC: 45A (GPMM1840)
Battery: 3350mAh 4S LiPo
Battery charger and balancer
Radio: Four channel
Servos: Five mini
(2-ailerons, 2-elevator, 1-rudder)
Servo Extension: One 6" (152mm) for ailerons
Y-Harness: One for aileron servos
Propeller: 12x6E (APCQ4130)
Misc. Items: Foam rubber padding, building and field equipment
SPECS: Wingspan: 49.6" (1260mm)
Flying Weight: 56.4 - 77.6oz (1600 - 2200g)
Wing Area: 598 sq in (38.6 sq dm)
Wing Loading: 19 oz/sq ft (58 g/sq dm)
Length: 49.7" (1262mm)
Airfoil: Symmetrical
Center of Gravity: 3.5" (90mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws-
Ailerons: Up & Down 0.79" (20mm)
Elevator: Up & Down 0.79" (20mm)
Rudder: Right & Left 2.0" (50mm)
jxs 05/26/10
ir/jxs
|