This is the electric powered, 2.4GHz radio controlled, ready to run
1/16 scale Traxxas E-Revo VXL Racing Monster Truck.
FEATURES: Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type
Drive: Four wheel
Radio: Traxxas 2.4GHz with waterproof digital high-torque steering
servo, waterproof receiver box
Electronic Speed Control: Traxxas VXL-3m waterproof, with high-
current connector, training mode, reverse and low voltage detection
for use with 2S and 3S LiPo packs
Motor: Traxxas Velineon 380 brushless motor with Neodymium magnets,
sintered rotor and high RPM ball bearings, 3.5mm gold plated bullet
connectors
Spur Gear: 45 tooth
Pinion Gear: 28 tooth 48 pitch, extra pinion gear included for 50+
MPH operation with extra battery (see below)
Battery: One Traxxas Power Cell 1200mAh 6-cell NiMH w/high current
connector, dual NiMH battery capability (extra battery (TRAC2925)
and series adapter (TRAP3063) not included and must be purchased
separately).
Vehicle is also compatible with one 2S or 3S LiPo pack (not
included) LiPo mode on ESC must be selected.
**NOTE the ESC and motor CANNOT handle dual LiPos, if using dual
batteries, both must be NiMH.**
Battery Charger: 110V wall type
Body: Painted and trimmed with applied decals
Bumper: Front, black chrome
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
telescoping universal joint shafts
Transmission: Ball bearing equipped with adjustable slipper clutch
Differentials: Sealed silicone filled planetary gear type
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Tires: Multi terrain, with foam inserts 1.8" (46mm) wide, 3.2"
(82mm) diameter
Wheels: Gemini 5-spoke with black chrome finish 1.5" (38mm) wide,
2" (51mm) diameter, standard size 12mm hex
Steering arm with spring loaded servo protection
INCLUDES: RTR Traxxas E-Revo VXL Racing Monster Truck with 2.4GHz radio,
painted body, 6-cell battery, charger, extra pinion gear and
instruction manual
REQUIRES: AA Batteries: Four for transmitter
SPECS: Vehicle-
Length: 12.9" (328mm)
Width: 9.4" (239mm)
Height: 4.6" (117mm)
Front and Rear Track: 9.4" (239mm) distance between outer edges of
wheels
Wheelbase: 7.9" (202mm)
Ground Clearance: 1.7" (43mm)
Body-
Length: 11.3" (288mm)
Width: 4.3" (110mm)
Height: 2.8" (71mm)
COMMENTS: If wanting to upgrade to a battery with a slightly higher mAh rating,
the DuraTrax 1600mAh NiMH 7.2V 6-Cell Battery (DTXC2192) is an
ideal choice.
The ball bearings in the Traxxas E-Revo VXL are rubber sealed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed alternatives from Duratrax;
Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511
The Traxxas 2.4GHz E-Revo VXL is available in the following colors;
Blue, TRAD18BB Black, TRAD18LL
Gray, TRAD18EE Red, TRAD18RR
jxs 03/30/10
ir/jxs
|