This is the radio controlled, gasoline or glow powered, almost-ready-to-fly
                  Cessna 195 QB (Quick Build) Scale Airplane
                    in Yellow Color Scheme from Aeroworks.

FEATURES: Construction: Laser cut, CAD design jig built balsa and ply, plastic
            cockpit with seats and dash
          Wings: Two-piece balsa and ply construction with carbon wing tube
          Aileron Control: Dual servo
          Rudder Control: Single servo pull-pull design
          Engine Mounts: For 2-stroke engines, two-piece composite construction
            with wooden standoffs, for gasoline engines, prebuilt plywood with
            aluminum standoffs
          Cowl: Painted fiberglass
          Navigation Lights: Preinstalled in wings and fuselage
          Covering: Ultracote
          Canopy and Windows: Clear, pre-mounted
          Landing Gear: Painted 0.16"(4mm) thick  aluminum, steerable tailwheel
            4" (100mm) diameter foam main wheels
          Spinner: 2.25" (57mm) polished aluminum
          Fuel Tank: 25oz (750cc) for gasoline
          Wheel Pants: Painted fiberglass
          Building Time: Ready to fly in approximately 12-15 hours
          Warranty: Aeroworks manufacturing guarantees this kit to be free from
            defects in both material and workmanship at the date of purchase.
            This limited warranty does not cover any component parts damaged by
            use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            all hardware, decals, fuel tank, landing gear, wheels, wing tube,
            wing tube, instruction manual, navigation lights with wiring, throw
            meter, CG buddy and plastic cockpit

REQUIRES: Radio: 10-channel minimum with 8-ch receiver, 2.4GHz recommended
          Aileron Servos: Two w/at least 140 oz/in torque @ 6V
          Rudder Servo: One w/at least 180 oz/in torque @ 6V
          Flap Servos: Two w/at least 140 oz/in torque @ 6V
          Elevator Servos: One with at least 180 oz/in torque @ 6V
            all servos listed above must be digital with metal gears
          Throttle Servo: One standard size and torque
          6" (152mm) Heavy Duty Servo Extensions: Two
          18" (457mm) Heavy Duty Servo Extensions: Four
          24" (610mm) Heavy Duty Servo Extensions: Two
          Receiver Battery: 6V 1700mAh minimum
          Ignition Battery: 4.8V 1700mAh (if using gas engine)
          Two switches with charge jacks (receiver, ignition for gas engine)
          Navigation Light Battery: 4.8V, 1700mAh
          Engine: 1.60 - 1.80cu in (26 - 29cc) glow OR
                  1.80 cu in (30 cc) gasoline
          Muffler: Pitts type recommended
          Propeller, building and field equipment

SPECS:    Wingspan: 90" (229cm)
          Wing Area: 1350 sq in (87.21 sq dm)
          Fuse Length: 69" (175cm) rudder to front of cowl
                       71.5 (182cm) rudder to front of spinner
          Weight: 15 - 16lbs (6.8 - 7.2kg)
          Cowl Width: 8" (203mm)
          Center of Gravity: 5-5/8" (143mm) back from the leading edge of the
            wing measured from the root end of the wing

          Control Throws-         Low Rate              High Rate
          Aileron Up and Down:      10°                   20°
          Rudder Left to Right:     10°                   25°
          Elevator Up and Down:     10°                   20°
          Flap Down                 3/4" (19mm)         1-1/2" (38mm)

                                                                   jxs 03/02/10
                                                                         ir/jxs