This is the electric powered, radio controlled, almost ready to fly
     ElectriFly Cirrus SR22 Turbo Sport-Scale Airplane from Great Planes.
             Ideal for pilots with moderate low-wing experience.

FEATURES: Construction: Fiberglass fuselage with molded vertical fin
          Wings: Two piece, balsa and ply construction with carbon wing tube,
            factory hinged ailerons and plastic winglets
          Aileron Control: Dual servo
          Landing Gear: Prebent aluminum with steerable nose gear
          Wheels: Three foam 1.75" (44mm) diameter
          Wheel Pants: Painted fiberglass
          Cockpit: Plastic windows with instrument panel detail, removable
            fiberglass hatch provides access to radio gear
          Building Time: Ready to fly in 2-3 hours
          Motor Mount: Constructed of plywood and pre-installed

          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            date of purchase.

INCLUDES: ElectriFly Cirrus SR22 Turbo Airplane, Landing Gear, Wheels, Hardware
            Wing Tube, Decals and Instruction Manual

REQUIRES: Radio: 4-channel
          Servos: Four nano, GPMM1210
          Servo Extensions: Two 12" (305mm) for aileron servos
          Y Harness: One for aileron servos
          Motor: .10 outrunner brushless, GPMG4595
          Electronic Speed Control: 35A brushless compatible, GPMM1830
          Battery: 11.1V 1500-3350mAh LiPo
          Battery Charger: LiPo compatible
          Propeller: 10x7E, APCQ4123
          Building & field equipment

SPECS:    Wingspan: 50.5" (1285mm)
          Wing Area: 305 inē (19.7 dmē)
          Weight: 2.5-3lb (1130-1360g)
          Wing Loading: 19-23 oz/ftē (58-70 g/dmē)
          Length: 36" (915mm)
          Airfoil: Semi-symmetrical
          Center of Gravity (CG): 2-3/16" (56mm) back from the leading edge of
            the wing at the fuselage
          Control Throws:             High Rate           Low Rate
            Elevator, Up & Down:   1/4"  (6mm)  12°    1/8"  (6mm) 6°
            Rudder, Right & Left:  7/16" (11mm) 17°    1/4"  (6mm) 10°
            Ailerons, Up & Down:   4/16" (11mm) 17°    5/16" (8mm) 12°

COMMENTS: Pilot shown in photos is not included. If wanting to install a pilot
            figure, the Williams Bros. 1/8 scale Sportsman Pilot Bust
            (WBRQ1130) fits nicely under the canopy.
          This model is covered in Top Flite Jet White MonoKote, TOPQ0204.

                                                                   jxs 06/15/10
                                                                         ir/jxs