Top Flite Giant P-40 Warhawk Scale ARF 2.6-3.3,86"

Tower Stock# LXZKD0  •  Manufacturer Stock# TOPA0705
Top Flite Giant P-40 Warhawk Scale ARF 2.6-3.3,86
Shipping Note:Details
Easy Pay
Request 2 Payments ($325.00, $324.99) Details
Money Saving Combos
 
LZ2179
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the radio controlled, glow or gasoline powered, almost ready to fly
Giant P-40 Warhawk from Top Flite.

FEATURES

Construction: Balsa & ply and fiberglass
Wing: One-piece
Aileron Control: Dual servo with dual servo flap control
Cowl: Painted fiberglass
Canopy: Clear with painted-on frame lines, detailed cockpit with
instrumentation
Spinner: Aluminum 5.5" (140mm) diameter, painted red
Covering: Matte finish MonoKote
Landing Gear: Heavy duty fixed, 5" (127mm) diameter main foam
wheels, 1-1/2" (38mm) foam tailwheel
**Robart makes a set of giant scale 100° rotating retracts for this
model ROBQ1665, see COMMENTS
Fuel Tank: 24oz (720cc), approximate
Building Time: Ready to fly in several hours
Warranty: Top Flite Models guarantees this kit to be free of defects
in material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.

INCLUDES

Pre-built fuselage wing and tail assemblies, decals, landing gear,
wheels, spinner, hardware package, fuel tank, cockpit detail and
photo-illustrated instruction manual

REQUIREMENTS

Engine: 2.6 - 3.3 cu in (43 - 55cc) gasoline or glow, (the DLE 55
DLEG0055 is recommended. The manual provides specific instructions
for the mounting of this engine. Modifcations may be needed if
mounting other engines. See COMMENTS
Muffler: To match selected engine, J'TEC makes a muffler (JTCG1040)
specifically for use with this airplane and the DLE 55 engine
Radio: At least 5-channel, 6-channel needed if installing retractable
landing gear
Servos: Nine, all control surfaces require high-torque servos, servos
with 40 oz-in of torque can be used for throttle, choke and air
valve
Heavy Duty 24" (310mm) Servo Extensions: Two for ailerons
Heavy Duty 12" (305mm) Servo Extensions: Five, two for flaps, two
for elevator, one for rudder
Y-Harnesses: One each for aileron, flaps & elevator
Receiver Battery: At least 1500mAh
Heavy Duty Switch Harness: Two
Charge Receptacle: Two
Servo Arms: Two 1", one 2"
Building and Field Equipment

SPECIFICATIONS

Wingspan: 86" (2,185mm)
Wing Area: 1,262inē (81.4dmē)
Weight: 23-24lb (10.43-10.88kg)
Wing Loading: 42-44oz/ftē (128-134g/dmē)
Length: 72" (1,830mm)
Airfoil: Semi-symmetrical
Center of Gravity (CG): 5.5" (140mm) back from the leading edge of
the top of the wing on both sides of the fuselage
Control Throws- Low Rate High Rate
Elevator Up & Down: 3/4" (19mm) 10° 1" (25mm) 13°
Rudder Right to Left: 1" (25mm) 9° 1-7/8" (48mm) 18°
Ailerons Up & Down: 3/4" (19mm) 13° 1" (25mm) 18°
Flaps: 2-1/2" (64mm) 36°

COMMENTS

If modeler is using the DL-55cc engine, the stock muffler will not
fit in the cowling and the J'TEC Pitts Wraparound Muffler
(JTCG1035) must be used for a clean installation.

If modeler is installing the giant scale 100° rotating retracts, the
following items are required;
#157VR Large Air Control Kit, ROBQ2305
#169 Pressure Tubing 10' ROBQ2369
#160LWC LH Offset Pneumatic Tail Wheel, ROBQ2225

Following are the colors of Top Flite MonoKote used to cover this
model and the order numbers for 6" rolls;
Flat Olive Drab, TOPQ0510 Flat Dove Gray, TOPQ0511
Flat Tan, TOPQ0516 Missile Red, TOPQ0201
Flat Black, TOPQ0508

jxs 05/10/10

Resources
See Tower Catalog page 47.
Know Before You Fly
Easy RC: Airplanes
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐