This is the electric powered, radio controlled, almost ready to fly,
Malibu 2 F3P 33.2" Flat Foam Monoplane from Tech One.
For flying indoors or outdoors with slight wind.
FEATURES: Construction: 0.12" (3mm) thick EPS Depron foam with carbon fiber
truss system to add strength and eliminate flex
Wing: One-piece
Landing Gear: Rods with 1" (25.4mm) plastic wheels, foam wheel covers
Aileron Control: Single servo
Pushrods: Carbon fiber
Building Time: Ready to fly in approximately three hours
INCLUDES: Malibu 2 F3P 33.2" Monoplane with landing gear, wheels, pushrods,
hardware and instruction manual
REQUIRES: Radio: 4-channel with micro receiver
Servos: Three micro high-torque 2.5g (1-aileron, 1-elevator,
1-rudder)
ESC: 8A brushless capable
Motor: Rimfire brushless 250 or 300
Propeller: 8x4 - 9x5
Battery: 7.4V 2S 300mAh LiPo
Battery Charger: LiPo compatible
Building and field equipment
SPECS: Fuselage Length: 34.8" (884mm)
Wingspan: 33.2" (845mm)
Flying Weight: 4.8 - 5.6oz (135 - 160g) with battery
Center of Gravity (CG): 3.15" (80mm) back from the leading edge of
the wing measured at the center of the wing
Control Throws* Sport 3D
Ailerons: Up and Down 1.04" (26.4mm) 2.86" (72.6mm)
Elevator: Up and Down 0.98" (24.8mm) 2.93" (74.4mm)
Rudder: Right and Left 1.46" (37.2mm) 4.40" (111.6mm)
*Control throws are measured from the widest point of the control
surfaces
Exponential Sport 3D
Ailerons: 20% 45 - 55%
Elevator: 20% 45 - 60%
Rudder: 20% 45 - 60%
jxs 03/28/10
ir/jxs
| 
Primary Accessories
Primary Accessories
