This is the radio controlled, gasoline powered almost-ready-to-fly
      50cc Sport Cub S2 QB (Quick Build) Airplane with Red Color Scheme
                                from Aeroworks.

FEATURES: Construction: Laser cut and jig built balsa and ply with pre-hinged
            and glued double-beveled control surfaces
          Wings: Two-piece balsa and ply construction with pre-hinged ailerons
            and 6061 T-6 anodized aluminum wing tube
          Aileron Control: Dual servo
          Rudder Control: Single servo pull-pull system
          Engine Box: Plywood, installed and fuel proofed, laser cut mounting
            template
          Cowl: Painted fiberglass
          Covering: Ultracote, red color scheme
          Canopy: Pre-mounted molded plastic
          Landing Gear: Painted and pre-mounted 7075 Aluminum, 0.16" (4mm)
            thick with 3.3" (85mm) diameter lite type wheels
          Fuel Tank: 25.3oz (750cc)
          Wheel Pants: Painted fiberglass
          Building Time: Ready to fly in approximately 12-15 hours
          Warranty: Aeroworks manufacturing guarantees this kit to be free from
            defects in both material and workmanship at the date of purchase.
            This limited warranty does not cover any component parts damaged by
            use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            all hardware, decals, CG tool, fuel tank, landing gear, wheels,
            wing tube and instruction manual on CD

REQUIRES: Radio: 10-channel minimum computer radio with PCM receiver strongly
            recommended
          Aileron Servos: Two digital metal gear 172 oz/in torque @ 6V
          Flap Servos: Two digital metal gear 172 oz/in torque @ 6V
          Rudder Servo: One digital metal gear 172 oz/in torque
          Elevator Servo: Two digital metal gear 172 oz/in torque
          Throttle Servo: Standard size high speed
          Servo Extensions: Four 18" Two 6" Two 24"
          Receiver Battery: 7.4V 5200mAh minimum
          Ignition Battery: 7.4V 2600mAh minimum
          On/off Switches: Two with charge jacks
          Engine: 50cc gasoline
          Muffler: Wrap around slim fit type
          Spinner: 3.5" (89mm)
          Building and field equipment

SPECS:    Wingspan: 110" (279cm)
          Wing Area: 1760 sq in (113.70 sq dm)
          Fuse Length: 69" (175cm) Rudder to Front of Cowl
          Fuse Length: 72" (183cm) Rudder to Front of Spinner
          Weight: 19 - 20lbs (8.6 - 9.0kg)
          Cowl Width: 9" (229mm)
          Rudder Height with Tail Wheel: 18" (457mm)
          Center of Gravity: 5" (127mm) back from the leading edge of the wing
            measured from the root end of the wing
          Control Throws-         Low Rate      Medium Rate      High Rate
          Elevator up & down:   1-1/8" or 17° 1-3/4" or 27°    2-1/2" or 40°
          Rudder left to right: n/a or 25°    n/a or 35°       n/a or 45°
          Ailerons up & down:   7/8" or 20°   1-1/4" or 30°    1-3/4" or 40°
          Flap:                 7/8" or 20°   1-1/4" or 30°    1-3/4" or 40°

                                                                   jxs 11/17/09
                                                                         ir/jxs