Futaba 3PL 3-Channel FHSS System

Tower Stock# LXZZD1  •  Manufacturer Stock# FUTK1300
Futaba 3PL 3-Channel FHSS System (large view)
Notes from our tech department:
This is the Futaba 3PL 2.4GHz FHSS Radio System
with the R2004GF 4-Channel Receiver.
Transmitter and receiver only, servos not included.

FEATURES

Special mixing includes 4WS for crawlers or brake mixing on 1/5
scale requiring front and rear brakes
Steering/Throttle/CH3 and CH4 servo reversing and end point
adjustments
ABS braking with fast, mid and low pulses
50/50 Throttle function
Channel 4 neutral trim
Ten model memory with 3-character model naming and model reset
Channel 3 switching
Channel 4 neutral trim
Steering dual rate lever
Transmitter low battery alarm when voltage drops below 4.2V
Internal transmitter antenna
One year limited warranty through manufacturer beginning at date of
purchase

INCLUDES

Futaba 3PL 2.4GHz FHSS Transmitter with R2004GF 4-Channel Receiver
on/off switch, small screwdriver and instruction manual

REQUIREMENTS

AA Cells: Four for transmitter
Servos of modeler's choice

SPECIFICATIONS

3PL Transmitter-
FHSS Wheel Type 3+1 Channel
Power Requirement: Four AA cells
Current Drain: 100mA or less

R2004GF Receiver (FUTL7617)
Power Requirement: 4.8V or 6V shared with servos
Current Drain: 30mA at no signal
Size: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.49oz (14g)

WHILE THIS TRANSMITTER COMES WITH A CHARGE PLUG BUILT IN, IT
CANNOT BE USED UNLESS YOU USE PART NUMBER HSP29615 AND A CHARGER
THAT CAN HAVE THE CHARGE CURRENT ADJUSTED TO 4.8 VOLTS AT 200 MAH.

***Radio system only compatible with FHSS protocol receivers such as
R2004GF (FUTL7617)
JMM 21OCT13

Resources
Easy RC: Radio Systems
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐