This is the optional Tekno RC M6 Driveshaft Kit for the
              Traxxas 2WD Slash, and Nitro Rustler and Stampede.

FEATURES: Reduces slop and increases durability, compatible with stock wheels
            and nuts-no modifications needed
          Custom 6mm stub axles-no more bending or breaking
          Larger bearings for better load handling-10x15x4mm inner, and
            6x12x4mm outer bearing (stock is 5x11x4mm inner/outer)
          Hardened steel driveshafts and drive cups
          Captured CV drive pin
          1, 2, 3 and 4° settings available with the 0.5 and 1.5° rear hubs

INCLUDES: Instruction Sheet
          Four 6x10x2.5mm Shims
          Two each-
            1.5° Nylon Hub Carriers
            6x12x4mm Bearings
            Hardened Steel Drive Cups
            Nylon 12mm Wheel Hexes
            0.5° Degree Nylon Hub Carriers
            10x15x4mm Bearings
            Hardened Steel CVAs

                                                                   jxs 11/11/10
                                                                         ir/jxs