This is the Thunder Tiger Ripper OBL 29/37-10H
Series Outrunner Brushless Motor.
Stong magnets for high output torque and high temperature rating
Dual ball bearings shaft support
Cooling mechanical design that allows you to get the
most efficiency out of the motor
18 month warranty
One Thunder Tiger Ripper OBL 29/37-10H outrunner brushless motor
Three 3.5mm male bullet connectors
Three 3.5mm female bullet connectors
Heat shrink for all bullet connectors
Screw set with 4 screws
One 2.5mm hex wrench
Installation of motor
Soldering the bullet connectors to the motor wire
Motor Diameter: 1.12" (28.5mm) Motor Length: 1.18" (30mm) Shaft Diameter: 1/8" (3.2mm) Shaft Length: 1.65" (42mm) kV Rating: 3700 rpm/V Weight: 2.33oz (66g) Input Voltage: 11.1V (3S LiPo) Max Constant Current: 35A Max Surge Current: 40A/60s Internal Resistance: 27 milli-ohms
Best used with a micro heli with a 3S LiPo setup
Works with E325 Thunder Tiger Helis
– If you need more information, use these Thunder Tiger resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.