Use over raw wood to seal grain. Drys clear.
Used for Tissue Covered Aiplane Models, Control Line Airplane Models,
R/C Airplane and Boat Models, Wood Scouting Projects and Model
For use on paper, fabric coverings, balsa and basswood.
Contains no lead.
One 1 oz Glass Jar of Sanding Sealer Primer
Use in a well ventilated area with lung, eye and skin protection.
Brush to apply Sanding Sealer to the model.
Fluid Ounce: 1 oz (29.5 mL)
Fuel Proof: No, Do Not use as a final coat.
Flammable: Contains toluol and methyl ethyl keytone.
As with any type of painting procedure, always test for compatibility
of materials on a scrap piece before attempting to paint model.
For best results: 1. Sand entire model until smooth surface is
obtained by using progressively coarse to fine sandpaper.
2. Fill in any surface irregularities with Aero-Gloss Balsa
3. Stir Sanding Sealer thoroughly. Apply as many coats as required
with a full brush to obtain smooth surface. Sand between coats
using tack rag to wipe away dust.
4. Dry 72 hours before paint application. Topcoat Sanding Sealer
with Formula U or Aero-Gloss Dopes.