This is the Thunder Tiger Zero Alpha Governor
                         for Model Helicopters.

FEATURES: High-speed CPU and advanced feed forward control algorithm
          Bright LED for RPM display
          Adjustable gain for the control response
          Adjustable mounting devices
          Light weight and low power consumption
          Designed to govern the engine speed between 10,500-21,000 RPM

INCLUDES: One Zero Alpha Governor
          One sensor
          Two 4mm magnets
          Three 3mm nuts
          Two 3mm beveled washers
          Two 3x16mm socket head cap screws
          Three button head screws
          Three 3mm flat washers
          Two 4mm beveled washers
          Two 4x20mm socket head cap screws
          Instructions

REQUIRES: Installation following the included instructions
          May require drilling your fan to accept the 4mm magnet - if
              the hole is not present in your fan

SPECS:    Digital advanced control
          Direct detection of engine rotation
          RPM resolution: .0003HZ
          Speed stability accuracy: 1%
          Control response: 14ms
          Range: 10,500-21,000RPM
          Operating voltage: 4.8-6.0v
          Current drain: 40ma at 4.8V

                                                                     ajw 3-7-11
                                                                         ir/jxs