This is an aluminum radial engine mount for both the O.S. 25FX and .32SX
engines. It comes with all the hardware needed to mount it to the firewall in
the airplane. The mount is capable of accepting a nose gear strut but it has
to be drilled out first.
One radial engine mount
One instruction sheet
Four lock washers
Four M3x12 cap screws for attaching the engine to the mount
One allen wrench
Four blind nuts
Four spring washers
Four M3x15 round head screws for mounting mount to firewall
Length of beams: 2" Distance between beams: 1 7/32" Distance across between mounting holes: 1 1/2" Distance between center holes : 9/16"
This mount is tapped specifically for the .25FX and .32SX only, but
there probably are other engines this will work with.
– If you need more information, use these O.S. resources –