This is the 2S Balance Lead and Banana to Deans TrakPower Adapter.|
For use with the TrakPower VR-1 Charger, TKPP5000
Balances a 2S TrakPower LiPo battery with a Deans connector
2S Balance Lead and Banana to Deans TrakPower Charge Lead
Balance Lead Length: 7.5" (190mm) not including connectors
Charge Lead Length: 7.8" (200mm) not including connectors
Charge Lead Wire Size: 14 AWG
When installing the LiPo balance adapter, always start with pin #1 as
noted on the charger's balance port. The #1 pin will always be on
the farthest right of the charger's balance port. Connect the
adapter's banana leads to the charger's output. Always match
polarities red to red (+) and black to black (-).
NOTE: For 2S and 4S balance adapters, not all pins on the charger's
balance port will be used. This is normal.