TrakPower 4S Balance Lead Banana To Deans TrakPower Ada

Tower Stock# LXCNZM  •  Manufacturer Stock# TKPP5612
TrakPower 4S Balance Lead Banana To Deans TrakPower Ada (large view)
Notes from our tech department:
This is the 4S Balance Lead and Banana to Deans TrakPower Adapter.

FEATURES

For use with the TrakPower VR-1 Charger, TKPP5000
Balances a 4S TrakPower LiPo battery with a Deans connector

INCLUDES

4S Balance Lead and Banana to Deans TrakPower Charge Lead

SPECIFICATIONS

Balance Lead Length: 7.5" (190mm) not including connectors
Charge Lead Length: 7.8" (200mm) not including connectors
Charge Lead Wire Size: 14 AWG

COMMENTS

When installing the LiPo balance adapter, always start with pin #1 as
noted on the charger's balance port. The #1 pin will always be on
the farthest right of the charger's balance port. Connect the
adapter's banana leads to the charger's output. Always match
polarities red to red (+) and black to black (-).
NOTE: For 2S and 4S balance adapters, not all pins on the charger's
balance port will be used. This is normal.

jxs 11/02/12
ir/jxs

Resources
‐ Mailing Address ‐
‐ Additional Contact Information ‐