This is the TrakPower 2S Balance Lead to 4mm Bullet Adapter.|
For use with the TrakPower VR-1 Charger, TKPP5000
Balances a 2S LiPo battery with 4mm female charge plugs and 2mm
female balance port
TrakPower 2S Balance Lead to 4mm Bullet Adapter
Balance Lead Length: 7.8" (200mm) not including connectors
Charge Lead Length: 7.8" (200mm) not including connectors
Charge Lead Wire Size: 14 AWG
When installing the LiPo balance adapter, always start with pin #1 as
noted on the charger's balance port. The #1 pin will always be on
the farthest right of the charger's balance port. Connect the
adapter's banana leads to the charger's output. Always match
polarities red to red (+) and black to black (-).
NOTE: For 2S and 4S balance adapters, not all pins on the charger's
balance port will be used. This is normal.