This is Perry's Regulating Pump, which is Used to Ensure Consistent
                        Fuel Flow to 2-cycle Engines.
                   This is used with Glow Fuel Only!

FEATURES: This pump will provide fuel flow in any attitude, tank
            position, or fuel level.
          Helps improve plug life and fuel economy.
          Works with any engine with a good mid-range of RPM.
          Requires tapping of the engines crankcase and installation
            of the pressure fitting.

INCLUDES: One Perry Pump Regulator
          One 6-32" Crankcase Pressure Fitting.
          4" of Semi-flexible Fuel Tubing
          Mounting Strap
          Instructions.

SPECS:    Measures 35mm long  x  25.5mm in diameter.

REQUIRES: One #36 Drill Bit and a 6-32" Tap

COMMENTS: This pump should NOT be used on an engine that is equipped with an
            air-bleed type of carb (For Example: some O.S. and Fox Engines).
          If you have an air-bleed type carb Perry MAY make a pump carb for
            your engine that would work with this pump. This pump may be used,
            without modification, with an engine equipped with a low-speed
            needle valve (like Super Tigre engines).
          Pump Has Three Fuel Fittings:
            One Tank To Pump Inlet
            One Crankcase To Pump Pressure Inlet
            One Pump To Carb Outlet
                                                                    10-22-98kzh
                                                                          ir/jl