This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable
of delivering sufficient amps.
Delivers excellent torque and speed for its small size, light weight
Can be used for elevators, ailerons and rudders
One year warranty
One S3107 Micro Servo with Futaba J male connector and mounting
Speed: .12 sec/60° @ 4.8V
Torque: 17 oz-in (1.2 kg-cm) @ 4.8V
Dimensions: 0.9 x 0.4 x 0.8" (7/8 x 7/16 x 13/16")
(22 x 11 x 20mm)
Weight: 0.32 ounce (5/16oz) (9.0 grams)
Connector: Male "J" type with approx. 5" wire
Output Shaft Diameter: 5mm
This servo cannot be used with gasoline engines or large/middle
scale gliders or other models that require torque. Use of 6.0V not
recommended as this will shorten servo life.
For replacement servo horn use FUTM2005
updt jxs 10/30/03