This is the Muffler Screw Set for the Supertigre G90 Bolt-Thru Style Engine.|
These screw are used to hold the muffler to the engine
Uses nuts and lock washers to hold muffler without the need to
have the crankcase or muffler threadad
Works with the following SuperTigre engines: GS40, GS45,
G61, G75 and G90
Two 3.5x40mm machine thread screws (threaded 26mm)
Two 3.5mm steel nuts
Four 3.5mm lock washers
One 4x22mm machine thread screw
One 4mm steel nut
One 4mm lock washer
These screws use a flat bladed screwdriver.
This Will Not Work with the G2300.