This is a Standard Servo with a Ball Bearing on the output shaft.|
This has a "J" connector and uses a nylon gears.
This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable
of delivering sufficient amps.
Single Top Ball Bearing
Same mounting as S148 and S9201 (individual rectangular grommets)
One S3001 Standard Servo
One accessory package
Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16")
(40 x 20 x 36mm)
Weight: 1.6oz (1-9/16oz) (44g)
Torque: 33 oz-in (2.4kg-cm) @ 4.8V
42 oz-in (3.0kg-cm) @ 6V
Transit: 0.28 sec/60° @ 4.8V
0.22 sec/60° @ 6V
updt jxs 10/29/03
updt jxs 09/14/04
updt jxs 10/29/04
updated jpg 11/9/07
updated JAW 11/27/07