This is the Futaba S9402 Hi-Speed Coreless Ball Bearing High-Torque Servo.
Great for 1/10 scale Cars (see COMMENTS), Boats, Airplanes and Helicopters.
This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable
of delivering sufficient amps.
Two Ball Bearings
Metal Gears (brass and steel)
Dust and Water Resistant
Plated "J" type Connector (Gold colored)
SPECS: Size: 1.6 x 0.8 x 1.5" (1-5/8 x 13/16 x 1-1/2") (41 x 20 x 38mm)
Weight: 1.9oz (1-15/16oz) (55 grams)
Torque: 89 oz-in @ 4.8V - 111 oz-in @ 6V
(6.4 kg-cm @ 4.8V - 8.0 kg-cm @ 6V)
Transit time: .12 sec/60° @ 4.8V - .10 sec/60° @ 6V
Connector: "J" type with about 10" lead
INCLUDES: One S9402 servo
Four Black rubber rectangular grommets
Four brass eyelets
Four servo mounting self-tapping screws (#4x1/2")
Three black plastic servo horns (arms)
COMMENTS: Do not use with 1/8 scale vehicles. Use a servo with higher torque
such as the S9350 (FUTM0235) or the S9351 (FUTM0236).
updt jxs 10/30/03
updt jxs 10/29/04
updt jxs 9/26/05