This is the optional HPI Super MT Chassis|
for the RS4 Nitro MT2.
Will not fit the original MT.
Chassis is ultra-strong 7075S aluminum to provide a stiff and
stable platform for the Nitro MT2
Chassis holes are pre-drilled and countersunk
One Optional Heavy-Duty Main Chassis for the HPI RS4 Nitro MT2
Four Z581 3mm x 18mm flat head self-tapping screws (HPIC0581)
Four Z529 3mm x 15mm flat head screws (HPIC0529)
Two Z567 3mm x 10mm round head self-tapping screws (HPIC0567)
Thirteen Z578 3mm x 12mm flat head screws (HPIC0578)
Length: 13-1/2" (343mm)
Width at widest point: 5-1/8" (130mm)
Thickness: 0.098" (2.5mm)
When using screws, it is always recommended to use a thread locking
compound such as GPMR6060.
This will prevent the screws coming lose due to engine vibration.