This is a Sport Float Kit Designed for the Great Planes Piper J-3 Cub .40
          Kit, but May Also Be Used On Any 5-9.5lb .40 Size Plane.

FEATURES: Balsa and Ply Die-Cut, Interlocking Parts and Complete Balsa Sheeting
          Includes All Materials needed for Mounting to Any Plane, Plus Custom
            Mounting Hardware for the Great Planes Piper J-3 Cub .40
          Change from Floats to Wheels in Less Than 10 Minutes with Only a
            Phillips Screwdriver and Hex Wrench
          May be Finished with MonoKote Covering or Fiberglassed and Painted
          Includes a Tough, Lightweight Aluminum Water Rudder which provides
            Positive Control at Slow, "taxi" Speeds, while incorporating a
            Full Kick-Up Function to Protect the Floats during beach landings
            or when striking underwater objects.
          Comes with a Brass-Plated Steel Flex Cable for Precise Water
            Rudder Control

INCLUDES: All Wood to Build the Floats, Mounting Hardware, Rudder, Rudder Cable
            and Photo Illustrated Instructions.
REQUIRES: Glues, Building Equipment, Soldering Equipment, and either
            Covering or Fiberglass and Paint (see below).

          If covering, recommend:               If 'glassing, recommend:
            1 roll of MonoKote                     Finishing resin
            Sealing iron                           3/4oz fiberglass cloth
                                                   Mixing cups
                                                   1" wide paint brush
                                                   Mixing sticks
                                                   Epoxy paint

SPECS:   Length:  34.5"
         For planes weighing:  5 - 9.5lbs
         Width (at the widest point):  5-1/8"                       8-15-95/eke
         From tip to step: 17.75"                                         ir/jl