Hobbico Tx/Rx Charge Leads No 9VAP Futaba J

Tower Stock# LXL332  •  Manufacturer Stock# HCAP0101
Hobbico Tx/Rx Charge Leads No 9VAP Futaba J (large view)
Notes from our tech department:
This is a Transmitter and Receiver Charging Lead Set for
ALL Futaba Radio Systems EXCEPT for the 9VAP/9VHP Radios.

These Hobbico Charge Leads Make it Easy to Use the
Hobbico R/C Multi-Charger, AccuCycles, or the Scale Voltmeter.


Includes Both Transmitter and Receiver Leads w/Banana Plugs. They
plug directly into charging outlets (no soldering, crimping or
splicing plugs onto wires).
Plugs for All Futaba J Radios (but NOT for 9VAP/VHP)
Will work with other brands of chargers or voltmeters using banana
plug outputs.


One 1 meter (39.37") long Transmitter Charge Cord w/Banana Plugs
One 1 meter (39.37") long Receiver Charge Cord w/Banana Plugs


For voltmeter use, these Tx plugs will work only with the 4NBL
and older "J" Series Radios (because of diode protection).
May also be used with the 5 or 7 Channel Radios, but it will require
a 9V connector (purchased at Radio Shack).
Transmitter plug will not work with the Futaba 8FG when used with the
Hobbico voltmeter.

updt mcw 7/12/04
updt jxs 05/02/11

‐ Mailing Address ‐
‐ Additional Contact Information ‐