This is the Tower Hobbies BUILD-IT Activator with a pump.|
This is great for thick and medium CA that doesn't cure as fast as the instant.
Works on many foams and plastics, always test on a scrap piece of
material you are using for compatibility.
All you have to do is apply the CA, then spray the Activator
on the CA and it cures almost instantly.
Another way to apply this is to first apply the activator to a
piece of balsa you want to join to another piece, then add CA to
the other piece. When you put them together, you have an instant
The pump makes life that much easier, just hold the bottle 4-6"
away from area you are spraying & pump once or twice and it's done.
One 2oz (56.7g) bottle of Activator
For replacement tips, use TOWR3812
CAUTION, This may attack some foams and plastics. Always spray on
a test spot first, and ALWAYS wear safety glasses.
KEEP OUT OF REACH OF CHILDREN.
updt jxs 12/07/04