This is the O.S. Max Radial Mount for the 1.60FX With Muffler (OSMG0660)
and the 1.60FX Without Muffler (OSMG0661).
This Mount attaches to the firewall of the airplane
and provides a secure surface for the engine to attach to.
One piece Aluminum Xonstruction.
Precision machined horizontal and vertical faces insure perfect
engine alignment and protection from crankcase distortion.
One O.S. Max Radial Mount for the 1.60FX with:
Four M5x25 socket head cap screws
Four M5x18 socket head cap screws
Four 5mm blind nuts
Eight 5mm lock washers
One instruction sheet
Attaching mount to appropriate area on firewall with M5x25
socket head cap screws washers and blind nuts. Attaching engine
to mount with M5x18 screws and washers.
4mm wrench to tighten screws (can use DUBR1171).
Distance between engine mounting holes same side 1.22" (31mm) Distance between engine mounting holes opposite side: 2.52" (64mm)
Distance between firewall mounting holes 2.13" (54mm)
Distance from rear of mount (firewall) to the center of the rear most mounting hole: (2") 51mm
– If you need more information, use these O.S. resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.