This is the Large LiPo Safety Sack from Venom.|
Constructed of woven fiberglass, this sack is used by R/C pilots and
racers to contain any possible explosions from LiPo batteries
involved in a crash or during charging or discharging
2" (51mm) wide hook and loop material with vent on both sides of top
seams for charge leads
Fits into any field box or pit box
One large LiPo Safety Sack
Placing battery to be charged toward bottom of bag, routing charge
leads through vent at top seam and pressing hook and loop material
Length: 300mm (11.8")
Width: 233mm (9.2")
Charge batteries in a safe area away from flammable materials and
only on a non-flammable surface in a vented area. Do not discharge
batteries below 3V per cell. Doing so may result in cell damage and
subsequent cell venting on future charging
Do not recharge damaged batteries. Dispose of damaged batteries in
the proper manner.
It is modeler's sole responsibility to assure their charger is
working correctly. Always monitor charging process. Failure to do
so may result in cell damage or fire.
In the event of a crash, remove battery from model for observation
and place in a safe open area away from flammable materials.