Uses the silencer (muffler) that came with the engine.
Re-routes the exhaust to a more convenient location.
Fits all FS-70 and FS-91 Surpass and Surpass II's.
One Flexible Exhaust Extension for the O.S. Max FS-70 and the FS-91
Surpass Four Stroke Engines with two locknuts and instruction sheet
Threading pipe into exhaust port of engine until it stops, then
tightening locknut. Supporting end where silencer is attached to
Length: 12-3/4" (324mm) not including threaded ends
Length: 13-7/8" (353mm) overall
Diameter of flex pipe: 7/16" (11mm)
Inner Diameter: 1/4" (8mm)
Thread size, both ends: M11x.75 (pitch)
Bends in the pipe should be made as far away as possible from the
threaded ends. Final adjustment should be made in steps of only 2-
3 degrees at a time. Repeated adjustment to change the shape of
the pipe may weaken the pipe and cause it to break.
updated jpg 11/8/06