This is a pair of optional Pro-Line Black Split Six Wheels
              for use with the Pro-Line ProTrac Suspension Kit
              for the front and rear of the 2WD Traxxas Slash.
                         **Will not fit Slash 4x4.**

FEATURES: Negative 10mm offset for increased acceleration, corner speed and
            driveability
          Fits front and rear of the two wheel drive 1/10 scale Traxxas Slash
          Lightweight one piece design with simulated bead-loc ring
          Same track width as stock wheel
          High strength, DuPont nylon material

INCLUDES: Two Pro-Line Black Suspension Kit Split Six Wheels for the front
            and rear of the Traxxas Slash

REQUIRES: Using only with the ProTrac Suspension kit, PROC6066

SPECS:    Outer Diameter: 2.2" (56mm)
          Inner Diameter: 3.0" (76mm)
          Width: 1.6" (41.5mm)
          Hex size: 0.47" (12mm)

COMMENTS: Do not install these wheels by themselves on the Slash. Due to the
            negative 10mm offset they must be used with the ProTrac suspension
            kit.
          If using on the rear of the Associated SC10, the 12mm Wheel Adapters
            (PROC6080) must be purchased.

                                                                   jxs 02/23/10
                                                                         ir/jxs