This is a tuned pipe adaptor (also called an exhaust manifold), which
is used to adapt a tuned pipe to an engine. This adaptor is a piece of metal
tubing that turns 90 degrees towards the rear of the engine. At the end of this
adaptor you will install the piece of silicone tubing (called a tuned pipe
coupler, one is INCLUDED with this adaptor). The tuned pipe will then fit
into the silicon coupler. The tuned pipe is "tuned" by moving the pipe in or
out of the silicon coupler until one achieves maximum power and RPM.
This adaptor measures 1-5/8" from the center of the outlet pipe to the outside
of the adaptor where it attaches to the engine. Outer Diameter: 3/4" (19mm) This tuned pipe adaptor will fit the following engines:
O.S. .40 SF and .46 SF
8/31/92 JBN *8)
This will also fit the Thunder Tiger .46!!! 4/7/97 AST :-)
– If you need more information, use these Macs resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.