Tamiya 1/10 Weider HSV-010 TA-05V.2 Kit

Tower Stock# LXAUNE  •  Manufacturer Stock# 58484
Tamiya 1/10 Weider HSV-010 TA-05V.2 Kit (large view)
Notes from our tech department:
This is the radio controlled, electric powered, 1/10 scale
Tamiya TA05 Version II On-Road Race Car with the Weider HSV-010 Body.

FEATURES

Chassis: TA05 composite bathtub style 0.08" (2mm) thick, upper deck
and 0.10" (2.5mm) lower deck
Drive: Two belt, four wheel drive
Ball Bearings: Full set included
Motor: 540 type
Differentials: Ball type, 37 tooth
Shocks: Oil-filled CVA Super Mini, plastic bodies
Front Bumper: Urethane foam
Main Gear: 70 tooth composite
Pinion Gear: 20 tooth metal
Wheels: 5-spoke gray 0.94" (24mm) wide, 1.9" (47.7mm)
+2 offset
Tires: Racing slicks, 0.94" (24mm) wide, 2.5" (64mm) diameter, yellow
foam inserts
Body: Clear untrimmed Honda HSV-010 coupe with separately molded
rear wing and mirrors in gray plastic
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Suspension: Four wheel double wishbone, inboard front layout with
separate suspension mounts for easy maintenance
Steering: Four ball bearing assisted, high torque servo saver

INCLUDES

Tamiya TA05 Ver. II On-Road Car Kit with Pinion Gear, Spur Gear,
540 Motor, Clear Body, Illustrated Instruction Manual, Tires,
Wheels, Decals, Shocks and Shock Oil

REQUIREMENTS

Radio: 2-channel with one servo and electronic speed control
Radio Batteries: 8 AA batteries for transmitter
6-Cell Battery: Stick configuration with Tamiya type connector
Charger: AC/DC timed or peak for 6-cell battery
Paint: Spray or brush-on polycarbonate safe
Building and track equipment

SPECIFICATIONS

Vehicle-
Length: 14.7" (373mm)
Width: 7.4" (188mm)
Wheelbase: 10" (257mm)
Tread: 6.5" (165mm)
Gear Ratio: 1:7.19
Body-
Length: 16.6" (421mm)
Width: 7.5" (190mm)
Height: 4" (102mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 10x15mm F & R Ball Diffs 2 DTXC1595
4 5x8mm F & R Ball Diffs 2 DTXC1523
2 4x8mm Center Pulley 1 DTXC1511
2 5x11mm Front Axles 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x8mm Steering Arms 2 DTXC1523

Tamiya TA03, TA04, TA05, TL01, TB02, TB03 and TT01 bodies will also
fit this chassis.

jxs 03/31/11
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐