This is the Team DuraTrax I-Speed Mild Modified
Forward and Reverse Electronic Speed Control with a Futaba J connector.
FOR MILD MODIFIED MOTORS DOWN TO 16 TURNS ONLY!
ABS Braking for better control in and out of corners, and adjustable
reverse-delay, reverse-lockout, and traction control.
*** 120 Day Limited Warranty ***
FEATURES: Forward and Reverse and ABS Braking
MOSFET Equipped
Thermal Protected
More Efficient Than Mechanical Speed Controls
Reverse Lockout
LED ( Forward and Red Full Speed,Red and Green Reverse)
Pre-Installed Futaba J Connector
Pre-Installed Bullet Type Connectors For Motor
Standard (Tamiya Type) Connector For Battery Pack
ON/OFF Switch
BEC Equipped.
INCLUDES: One I-Speed Forward/Reverse Electronic Speed Control with Futaba J
Connector and Bullet Motor Connectors.
Three .1 Type Capacitors
One Instruction Sheet
SPECS: ON-Resistance: 0.0046
Traction Control: 0.0, 0.1, or 0.2
Reverse Delay: 0.3, or 0.8
Maximun Continuous Current: 192A
Maximum Peak Current: 660A
Number of Cells: 6-7
Size with Heatsinks: 1.48"L x 1.34"W x 0.57"H
Weight with Heatsink: 2.19 ounces
Connector: Motor: bullet
Battery: standard (Tamiya)
Motor: 16 Turn Mild Modified
Wires: 14 gauge
REQUIRES: Installing .1 Type Capacitors Onto Motor with Solder
Installing into Electric Vehicle
6 or 7 Cell Battery
Motor (16 Turn or Above)
kh2-21-02
Updated JPG 4/10/02
ir/kh
| 
Yes
