Team Durango 1/10 DEX410V3 4WD Off-Road Buggy EP Kit

Tower Stock# LXCBXR  •  Manufacturer Stock# TD102011
Team Durango 1/10 DEX410V3 4WD Off-Road Buggy EP Kit (large view)
Notes from our tech department:
This is the Radio Controlled, Electric Powered, 1/10 scale
Off-Road DEX410v3 Buggy Kit from Team Durango.
The differences between the DEX410Rv3 and DEX410v3 are as follows:
DEX410Rv3 DEX410v3
Composite Shock Towers Carbon Fiber Shock Towers
Composite Caster Blocks Aluminum Caster Blocks
Composite Rear Brace Carbon Fiber Rear Brace
Standard Shocks Big Bore Shocks
Composite Suspension Mounts Carbon Fiber Suspension Mounts


Chassis: Aluminum 0.08" (2mm) thick
Drive: Four wheel shaft drive
Shocks: Aluminum body, big bore oil-filled with titanium nitride
shafts for smooth action and increased durability and longevity
Shock Towers: Carbon fiber 0.16" (4mm) thick
Body: Clear polycarbonate with rear wing and decals
Transmission: Single speed with quick release slipper clutch
Spur Gear: Composite construction 48 pitch 87 tooth, quick release
Differentials: Bevel gear
Wheels: Dish type, yellow in color 12mm hex 2.2" (56mm) diameter
front width 1.02" (26mm) wide, rear width 1.5" (38mm) wide
Suspension: Single hanger for rear suspension allows easier and
faster anti-squat adjustment
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Team Durango DEX410v3 Buggy Kit with Wheels, Body with Wing, Decals
Diff Oil, Thread Lock and Instructions


Radio: 2-channel with high torque steering servo
Electronic Speed Control: To match selected motor
Motor: Brushless
Pinion Gear: 48 pitch, number of teeth to be determined by motor
Battery: LiPo Battery: 2S 7.4V saddle pack
Battery Charger: To match selected battery
Tires: 1.02" (26mm) front, 1.5" (38mm) wide rear
Shock Oil: Silicone, slightly heavier weight recommended for front
Building and track equipment


Length: 13.75" (349mm)
Width: 9.8" (249mm)
Wheelbase: 10.9 - 11.2" (278-285mm) adjustable
Internal Gear Ratio: 2.47:1
Weight: 61.7oz (1750g) ready to race
Length: 10.5" (266mm)
Width: 4.4" (112mm)
Height: 2.5" (63mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Slipper Clutch 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Gearbox 1 DTXC1535
2 5x10mm Rear Gearbox 1 DTXC1535
2 5x10mm Fr Hubs 1 DTXC1535
2 5x13mm Fr Hubs 1 TDRC1290
2 5x10mm Rear Hubs 1 DTXC1535
2 5x13mm Rear Hubs 1 TDRC1290
4 4x7mm Steering 2 DTXC1507

jxs 04/13/12

Parts Compatibility
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐