Team Durango 1/8 DNX408V2 4WD Off-Road Buggy Nitro Kit

Tower Stock# LXCBXT  •  Manufacturer Stock# TD102002
Team Durango 1/8 DNX408V2 4WD Off-Road Buggy Nitro Kit (large view)
Notes from our tech department:
This is the Radio Controlled, Glow Powered, 1/8 scale
DNX408V2 Buggy Kit from Team Durango.

FEATURES

Chassis: 0.20" (5mm) thick aluminum with black plastic side guards
Drive: Four wheel shaft
Engine Mount: Machined aluminum one-piece design accepts engines from
every manufacturer
Fuel Tank: Newly designed with pressure nipple relocated to the lid
for more consistent pressurization, neck redesigned to more
easily accept fuel guns for quicker pitting
Body: Clear polycarbonate buggy body with black plastic rear wing
Radio Box: Newly designed to separate battery and receiver
Shocks: Aluminum body, oil-filled 15mm big bore, thicker diaphragms
resist tearing
Shock Towers: 0.24" (6mm) thick aluminum
Brake: Piston pushes on exact center of brake pad and machined
bulkheads and pad mounts result in zero flex
Clutch; 3-shoe
Wheels: White plastic 3.4" (87mm) diameter, 1.55" (39.5mm) wide
17mm hex
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

DNX408V2 Buggy Kit with Body, Rear Wing, Wheels, Shock Oil, Diff Oil,
Window Mask Sheet, Decal Sheet, Foam Air Filter and Instruction
Manual

REQUIREMENTS

Radio: 2-channel with high-torque steering servo
Engine: .21 cu in (3.4 cc) buggy engine
Tuned Pipe: For 1/8 scale buggy
Tires: 1/8 scale buggy type w/foam inserts
Receiver Battery: 6-cell flat NiMH or 2-cell LiPo/LiFe battery
Battery Charger: Compatible with selected battery
Building and track equipment

SPECIFICATIONS

Vehicle-
Length: 15.9" (405mm)
Width: 11.9" (302mm)
Wheelbase: 12.8 - 13.1" (325 - 333mm)
Internal Gear Ratio: 3.31:1
Weight: 123.45oz (3500g)
Body-
Length: 12.7" (322mm)
Width: 6.4" (162mm)
Height: 3.5" (90mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x14mm flanged Fr Diff 1 TDRC1320
2 8x14mm flanged Fr Diff 1 TDRC1320
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 10x15mm Mid Driveshaft 1 DTXC1595
4 8x16mm Rear Uprights 2 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 5x10mm Clutch 1 DTXC1535

jxs 04/13/12
ir/jxs

Resources
Parts Compatibility
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐