AeroWorks Extra 300 QB ARF Red 100cc,106"

Tower Stock# LXYSW3  •  Manufacturer Stock# AEX300R100
AeroWorks Extra 300 QB ARF Red 100cc,106
Shipping Note:Details
Shipping Note:Details
Notes from our tech department:
This is the radio controlled, gasoline powered, almost-ready-to-fly
100cc Extra 300 QB (Quick Build) Airplane
in Red Covering from Aeroworks.
Designed for precision and 3D flying by advanced modelers.


Construction: Laser cut, CAD design jig built balsa and ply, double
beveled control surfaces
Wings: Two-piece balsa and ply construction with anodized aluminum
wing tube
Aileron Control: Dual servo
Rudder Control: Dual servo pull-pull design
Stabilizer: Two piece with 6061 T-6 anodized aluminum stab tube
Engine Mount: Fuelproofed plywood with laser cut mounting template
and machined aluminum engine standoffs
Cowl: Painted fiberglass
Covering: Ultracote
Canopy: Tinted, pre-mounted
Landing Gear: Painted 7075 aluminum, steerable tailwheel
Wheels: Two 4.3" (110mm) diameter, lite type
Fuel Tanks: 34oz (1000cc) for gasoline, 25oz (750cc) for smoke
Wheel Pants: Painted fiberglass
Building Time: Ready to fly in approximately 8-10 hours
Warranty: Aeroworks manufacturing guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This limited warranty does not cover any component parts damaged by
use or modification.


Pre-built and covered wings, fuselage and tail assemblies, pushrods,
all hardware, decals, two fuel tanks, landing gear, wheels, throw
meter, wing tube, engine standoffs and instruction manual


Radio: 6-channel minimum
Aileron Servos: Four with at least 180 oz/in torque @ 6V
Rudder Servo: Two with at least 180 oz/in torque @ 6V
Elevator Servo: Two with at least 180 oz/in torque @ 6V
all servos listed above must be digital with metal gears
Throttle Servo: One standard size and torque
6" (152mm) Heavy Duty Servo Extensions: Two
12" (305mm) Heavy Duty Servo Extensions: Two
24" (610mm) Heavy Duty Servo Extensions: Two
48" (1219mm) Heavy Duty Servo Extensions: Two
Receiver Battery: 6V 1700mAh minimum
Ignition Battery: 4.8 volt 1700mAh minimum
Switches with Charge Jacks: Two
Engine: 100cc gasoline with canisters or pipes and all mounting
Spinner: 4" (102mm)
Propeller, building and field equipment


Wingspan: 106" (269cm)
Wing Area: 1905 sq in (125.97 sq dm)
Fuse Length: 94" (239cm) rudder to spinner
89" (226cm) rudder to cowl
Weight: 27 - 28lbs (12.2 - 12.7kg)
Airfoil: Fully symmetrical
Center of Gravity: 4-1/4" (108mm) from the leading edge of the wing
measured at the wing tip

Control Throws- 3D Rate High Rate Low Rate
Elevator Up/Down 4-1/2" or 40 2-3/4" or 22 2" or 15
Rudder Left to Right: N/A or 45 N/A or 35 N/A or 25
Ailerons Up/Down 4-1/4" or 40 3-3/4" or 30 2-1/2" or 24

jxs 12/16/09

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐