Tamiya 1/10 Motul Nismo GT-R Kit

Tower Stock# LXZYY0  •  Manufacturer Stock# 58466
Tamiya 1/10 Motul Nismo GT-R Kit (large view)
Notes from our tech department:
This is the 1/10 scale electric powered, radio controlled,
Tamiya Motul Nismo GT-R On-Road Car Kit.

FEATURES

Chassis: TA05 version II with reduced width for better ground
clearance during chassis rolls and battery position shifted further
forward, composite bathtub style .08" (2mm) thick, single deck
frame
Drive: Four wheel two belt drive, tension adjustable
Motor: 540 motor with pre-attached leads
Ball Bearings: Full set included
Shocks: Four oil filled CVA super mini, plastic body
Gearboxes: Enclosed, front and rear
Differentials: Two ball type, 37T
Transmission: Single speed
Tires: Slick racing tire with foam inserts, 2.5" (64mm) diameter,
0.94" (24mm) wide
Wheels: One-piece 6-spoke gray in color, 1.9" (48mm) diameter,
0.94" (24mm) wide, +2 offset
Body: Lightweight polycarbonate Motul Nismo GT-R with decals
Bumpers: Foam front bumper
Suspension: IFS (Inboard Front Suspension) with horizontally
mounted shocks with push rod and rocker arm, front and rear
lightweight reversible arms for fine tuning, double wishbone rear
suspension
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Steering: Bell-crank type
Servo Saver: Included

INCLUDES

TA05 ver.II rolling chassis with oil filled shocks, 540 motor,
clear body, slick tires, foam inserts, foam bumper, 6-spoke wheels
22 tooth pinion gear, 70 tooth spur gear, rear wing, mirrors, decal
sheet and instructions
_

REQUIREMENTS

Radio: 2-channel with 1 standard servo and Electronic Speed Control
Radio Batteries: 8 AA size
Battery: 6-cell stick pack with standard connector
Charger: AC/DC peak type for 6-cell battery
Paint: Spray or brush-on for Lexan body
Misc. Items: Building and track equipment

SPECIFICATIONS

VEHICLE-
Length: 14.7" (373mm)
Width: 7.4" (188mm)
Height: 4.8" (122mm)
Weight: 2.3lbs (1060g)
Wheelbase: 10.1" (257mm)
Tread: 6.5" (167mm) center of wheels, side to side
Gear Ratio: 1:7.19
BODY-
Length: 17.4" (443mm)
Width: 7.6" (169mm) behind front wheels, narrowest point
(187mm) at rear wheels, widest point
Height: 3.5" (90mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x8mm Front Ball Diff 1 DTXC1523
2 5x8mm Rear Ball Diff 1 DTXC1523
2 10x15mm Front Ball Diff 1 DTXC1595
2 10x15mm Rear Ball Diff 1 DTXC1595
2 4x8mm flanged Motor Mount 1 DTXC1517
4 5x10mm Front Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535
2 4x8mm Center Pulley 1 DTXC1511
4 5x8mm Steering Arms 2 DTXC1523
4 5x8mm Front Shock Stays 2 DTXC1523

jxs 06/23/10
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐